To Next PageTo Next Page
Need help?Do you have a question about the CardioChek PLUS and is the answer not in the manual?
General| Battery Life | Approximately 200 tests |
|---|---|
| Device Type | Point-of-Care Analyzer |
| Measurement Parameters | Total Cholesterol, HDL Cholesterol, Triglycerides, Glucose |
| Display | LCD |
| Power Source | AC Adapter or 4 AA Batteries |
| Connectivity | USB, Bluetooth |
| Sample Type | Capillary or Venous Whole Blood |
| Sample Volume | 15-40 μL |
| Calibration | Factory calibrated |
| Memory | Up to 30 test results |
| Operating Humidity | 10% to 90% non-condensing |
| Operating Temperature | 15-40°C (59-104°F) |
| Dimensions | 6.5 x 3.5 x 1.5 inches (165 x 89 x 38 mm) |
Explains the CardioChek Plus test system using reflectance photometry and electrochemical biosensor technology.
Details how test strips are designed for specific analytes and function in the analyzer.
Describes the color-coded MEMo Chip containing test settings and lot-specific information.
Step-by-step guide for collecting capillary whole blood samples from fingertips.
Instructions for collecting venous whole blood samples using EDTA or heparin tubes.
Ensures system accuracy by running controls with new lots/shipments.
