What to do if CareFusion Alaris 8015 Desktop says patient ID will be changed?
If the Patient ID associated with the CareFusion Desktop unit should be changed, select 'Yes'. If the Patient ID associated with the unit should not be changed, select 'No'. This occurs because the Patient ID is not the same Patient ID that is currently associated with the device.
Why does CareFusion Alaris 8015 Desktop say drug or fluid not in current profile?
This can happen if the drug and its concentration are not in the currently selected Profile. Ensure that the correct Profile is selected and that it contains the correct drug and concentration.
What to do if CareFusion Alaris 8015 displays channel unavailable?
This issue arises when a channel is already infusing and cannot support the scanned infusion. If a secondary infusion was scanned, select a channel with a primary infusion that supports the secondary. If a primary infusion was scanned, select an idle channel to program on CareFusion Desktop.
What to do if scanned medication label is invalid on CareFusion Alaris 8015?
This may be happening because the barcode might not be readable or use a supported symbology. Make sure the ID label is legible and inform the pharmacy of the problem.
What to do if scanned label is invalid on CareFusion Desktop?
This may occur if the Profile feature is disabled or if the barcode is unreadable or uses an unsupported symbology. Ensure that the Profile is enabled and that the ID label is legible. If problems persist, inform the pharmacy.
How to fix patient ID is invalid on CareFusion Desktop?
Ensure that the ID label is legible. If it is, enter the ID manually into the CareFusion Desktop.
How to fix clinician ID is invalid on CareFusion Alaris 8015?
Ensure that the ID label is legible. If it is, enter the ID manually into the CareFusion Desktop.
General| Brand | CareFusion |
|---|---|
| Model | Alaris 8015 |
| Category | Desktop |
| Language | English |
To Next Page
