46
Specification of the MicroLoop
General:
Storage: >2000 tests including Flow/Volume
loops and Volume/Time curves
Printer Output: Compatible Hewlett Packard USB
printers (Specified models only).
Display: Colour 1/4VGA LCD.
Power supply: Input 100 to 240V, 50 to 60Hz.
Output 5V 2.0A (Class 1)
Battery Pack: Rechargeable Lithium Polymer 3.7V
1600mA-hours.
Dimensions: 120x80x20 mm.
Transducer 50x60x90mm.
Weight: 630g.
Operating Temperature: 0 to +40 °C
Operating Humidity: 30% to 90% RH
Transport and Storage
Temperature:
-20 to + 70 °C
Transport and Storage
Humidity:
10% to 90% RH
Spirometry Measurements:
Relaxed Expiratory Vital Capacity (VC)
Forced Expired Volume in 0.75 seconds (FEV.75)
Forced Expired Volume in 1 second (FEV1)
Forced Expired Volume in 3 second (FEV3)
Forced Expired Volume in 6 seconds (FEV6)
Forced Vital Capacity (FVC)
Peak Expiratory Flow Rate (PEF)
FEV
0.75
as a percentage of VC (FEV.75/VC)
FEV
0.75
as a percentage of FVC (FEV.75/FVC)
FEV
1
as a percentage of VC (FEV1/VC)
FEV
1
as a percentage of FVC (FEV1/FVC)
To Next Page
Loading...
