Need help?Do you have a question about the CareFusion PrinterNOx and is the answer not in the manual?
General| Brand | CareFusion |
|---|---|
| Model | PrinterNOx |
| Category | Measuring Instruments |
| Language | English |
Discusses NO therapy for respiratory conditions, recommended concentrations, dilution, and potential lung injury risks.
Explains the chemical reaction of NO with oxygen to form NO2 and its impact on gas delivery systems.
Details preventing environmental pollution from NO/NO2 exhaust using NOxSORB scavengers.
Details how to perform NO/NO2 measurements, including system checks, sample line connection, and error messages.
Provides instructions for zeroing and calibrating the NO and NO2 sensors, including gas setup and error handling.
Details how to adjust the upper and lower alarm levels for NO and NO2 concentrations individually.
Explains how to recover stored measurement data via printing or RS232 connection to a PC.
Describes accessing the current device configuration and sensor information through the status menu.
Covers device configuration options like clearing memory, setting date/time, and toggling output format.
Details the process for calculating required NO flow for ventilators using bias flow and gas concentration data.
Instructions for loading thermal paper into the PrinterNOx, including warnings about paper types and handling.
Details the care, charging procedures, and expected lifespan of the PrinterNOx rechargeable battery pack.
Explains how to clean the water trap, filter, and the exterior of the PrinterNOx unit safely.
Information on obtaining service manuals and the necessity of using trained personnel for repairs.
Explains the meaning of standard safety and compliance symbols found on the device.
Discusses the device's electromagnetic compatibility and susceptibility to external interference.
Lists technical specifications of the PrinterNOx, including detected gases, sensor type, measurement ranges, and resolution.
To Next Page
