To Next PageTo Next Page
Need help?Do you have a question about the CareFusion MicroLoop and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Brand | CareFusion |
| Model | MicroLoop |
| Printer | Built-in thermal printer |
| Connectivity | USB |
| Power | Mains/Battery |
| Measurement Range | Flow: ±16 L/s, Volume: 0 - 12 L |
| Operating Temperature | 10 - 40 °C |
| Storage Temperature | -20 - 60 °C |
| Humidity Range | 10 - 95% RH, non-condensing |
| Power Supply | 100-240V AC, 50/60 Hz |
| Weight | 2.5 kg |
| Dimensions | 300 x 210 x 85 mm |
| Output | Built-in printer, USB |
Details the MicroLoop's touch screen, icons, time/date adjustment, battery status, and help functions.
Explains initial setup, patient entry, and performing spirometry tests with the MicroLoop.
Covers volume/time graphs and options for viewing results, repeating, or rejecting manoeuvres.
Details viewing, saving, printing results, and performing baseline or post-medication tests.
Step-by-step guide for performing and verifying spirometer calibration using a syringe.
Configure system and spirometry options like language, units, printing, and test parameters.
Learn to enter admin mode, set access codes, and manage user function access.
Instructions for printing, connecting the cradle, and charging the MicroLoop's batteries.
Information on using the SPCS Windows application to interface with the MicroLoop via USB or serial port.
Covers transducer cleaning, servicing, and troubleshooting common device issues.
Details MicroLoop technical specifications and the list of spirometry measurements.
