7
Operation – Mouth Pressures (PImax/MIP +
PEmax/MEP)
Insert the battery into the compartment at the rear of the MicroRPM.
Fit the required Pressure Valve Assembly (‘Inspiratory’ for PImax
(MIP), ‘Expiratory’ for PEmax (MEP)) into the MicroRPM; insert a new
Bacterial Filter into the Pressure Valve Assembly and then the
Rubber Flanged Mouthpiece onto the Bacterial Filter, as shown
below.
Henrochech nv - Acacialaan 8 - 2630 Aartselaar - www.henrotech.be - info@henrotech.be
To Next Page
Loading...