To Next PageTo Next PageWhy won't my CareFusion MicroRPM turn on?
If your CareFusion Respiratory Product won't turn on, the battery might be exhausted. Replace the battery to resolve this issue. Alternatively, there may be a problem with the slide switch connection, in which case, the unit should be returned for servicing.
What to do if the CareFusion Respiratory Product display shows a reading before the test?
If the display of your CareFusion Respiratory Product shows a reading before a test has been performed, it's possible that the internal tubing to the pressure sensor is kinked. In this case, return the unit for servicing.
Details on the PUMA PC software for enhanced device functionality.
Procedures for conducting PImax and PEmax measurements.
Instructions for setting up the device for mouth pressure tests.
Instructions for setting up the device for SNIP testing.
Step-by-step guide for executing the SNIP test.
Information on battery level, low voltage indication, and replacement.
Guidelines for cleaning the unit and procedures for calibration.
Information on obtaining service and available accessories.
Key technical parameters of the MicroRPM device.
Contact details for sales, service, and technical support.
General| Brand | CareFusion |
|---|---|
| Model | MicroRPM |
| Category | Respiratory Product |
| Language | English |
