To Next PageTo Next PageWhat does it mean when Carel IR32M Controller displays EA, EB, EE during operation?
If the Carel Controller displays EA, EB, or EE during operation or when switching on, it indicates a data acquisition error. See the section 'Reset procedure'.
General| Brand | Carel |
|---|---|
| Model | IR32M |
| Category | Controller |
| Language | English |
Overview of the different models in the Infrared series and their applications.
Details on the wide range and universal power supply options for Infrared instruments.
Description of the front panel keys, LED display, and indicators for user interface.
Explanation of the remote control unit for programming and operating the instruments.
Details on the multifunction digital input and output capabilities of the controllers.
Information on the factory-set configurations for various Infrared models.
Important safety and installation warnings to prevent damage or hazards.
Guide to setting ambient set-point, differential, and other key parameters.
Step-by-step instructions on how to gain access and modify parameters.
Methods for exiting parameter modification, with or without saving changes.
Instructions for resetting the instrument to factory default settings.
Overview of parameter types (F and C) and their categorization.
Details on sensor parameters like type, calibration, virtual sensor, and units.
Parameters related to temperature control, differential, and direct/reverse operation.
Parameters for controlling compressor start-up, down-time, and duty settings.
Parameters for configuring defrost type, interval, duration, and priority.
Parameters for setting low/high temperature alarms, delay, and multifunction input.
Parameters for managing evaporator fans, including control modes and cut-out settings.
Parameters for serial address, special configurations, keypad inhibition, and remote code.
New functionalities like temperature logging, time defrost, and door-switch management.
Illustrations of wiring connections for multiple units and panel mounting.
Explanation of LED states and sequence of main operating phases.
Description of alarm codes, flashing LEDs, and their corresponding causes.
Model-specific guides for identifying and resolving operational problems.
Comparison of technical specifications across different Infrared models.
Comprehensive list of all parameters with their types, ranges, and default values.
Table showing resistance values for NTC sensors at various temperatures.
Information on parameter differences and special reset procedures for older units.
Physical dimensions and drilling templates for IR32 and related components.
Part numbers for sensors, controllers, accessories, and options.
Introduction to IR96 controller, new functions, and data logging.
Detailed description of the function of each button on the IR96 controller.
Guide to accessing parameters by level, modification procedures, and value memorization.
Information on IR96 alarm signals, error codes, and troubleshooting steps.
