19
2.5 TEMPERATURE CONTROL DIAGRAMS
TWO-COMPRESSOR UNIT WITHOUT ENERGY SAVING OPTION
COLD WATER VALVE
DIFFERENTIAL (HALF OF THE TOTAL)
Default values:
- Set-point compressor 1: 25% Hysteresis compressor 1: 25%
- Set-point compressor 2: 75% Hysteresis compressor 2: 25%
In case of use of default partialised compressors, the compressor steps coincide
with the relative partialisations.
TWO-COMPRESSOR UNIT WITH ENERGY SAVING OPTION
DIFFERENTIAL
(HALF OF THE TOTAL)
Default values:
- Set-point compressor 1: 49% Hysteresis compressor 1: 16%
- Set-point compressor 2: 82% Hysteresis compressor 2: 16%
In case of use of default partialised compressors, the compressor steps coincide
with the relative partialisations.
To Next Page
Loading...
