What to do if Carestream HEALTH CS 9000 3D Dental equipment is not connecting?
If the Carestream HEALTH Dental equipment unit doesn't connect, first ensure the unit is switched on. Then, allow time for the connection to establish between the unit and the computer. Finally, verify that the Acquisition interface is not hidden by another application; if it is, close the application that's masking it.
What to do if Carestream HEALTH CS 9000 3D Dental equipment shows error E1?
If you see error E1 on your Carestream HEALTH Dental equipment, it means the exposure button was released too early. To fix this, start the acquisition again, making sure to hold the exposure button until the acquisition cycle is complete.
What to do if Carestream HEALTH Dental equipment shows error I18?
If you encounter error I18, it indicates that the sensor is not correctly positioned for acquisition. Ensure that nothing is obstructing the sensor's positioning, and then press the reset button.
Why is the exposure button inactive on Carestream HEALTH CS 9000 3D?
If the exposure button on your Carestream HEALTH Dental equipment's X-ray remote control isn't working, it might be because the rotative arm is not in the start position. To resolve this, press the button to reset the rotative arm to its starting position.
What to do if Carestream HEALTH CS 9000 3D shows error I3?
Release the exposure button on the X-ray remote control of your Carestream HEALTH Dental equipment.
What to do if Carestream HEALTH Dental equipment shows error I16?
This error only occurs in panoramic mode. To resolve this issue on your Carestream HEALTH Dental equipment, raise the chin rest to its maximum height.
What to do if Carestream HEALTH CS 9000 3D shows error I1?
Wait until the Generator Cooling Indicator on the Acquisition interface of your Carestream HEALTH Dental equipment reaches zero.
What to do if Carestream HEALTH Dental equipment shows error I2?
Wait until the Generator Cooling Indicator on the Acquisition interface of your Carestream HEALTH Dental equipment reaches zero.
What to do if Carestream HEALTH Dental equipment shows error I17?
Wait for the positioning process to finish on your Carestream HEALTH Dental equipment.
Provides steps and important notes for powering on the unit and establishing connection.
Guides users on how to open the Panoramic and 3D Acquisition windows.
Details the process for acquiring panoramic, TMJ x2, and sinus images for patients.
Explains the procedure for acquiring TMJ x4 images for patients.
Guides on acquiring single-volume 3D images for patients.
Guides on acquiring multi-volume (stitching) 3D images for patients.
Lists common malfunctions, error codes, descriptions, and suggested actions.
Details cleaning and disinfecting accessories that contact mucous membranes.
Outlines procedures for cleaning and disinfecting components with skin contact.
Explains how to maintain optimum image quality through regular control and calibration.
General| Imaging Technology | Cone Beam Computed Tomography (CBCT) |
|---|---|
| Field of View (FOV) | 5 cm x 5 cm; 10 cm x 5 cm |
| Software | CS 3D Imaging Software |
| Resolution | High resolution |
| kVp | 60-90 kVp |
| mA | 2-15 mA |
| Radiation Dose | Low dose |
| Scan Type | 3D |
| X-ray Generator | High frequency |
To Next Page
