What to do if Carestream HEALTH CS 9000 Dental equipment is not connecting?
If the Carestream HEALTH Dental equipment unit doesn't connect, first ensure the unit is switched on. Then, allow time for the connection to establish between the unit and the computer. Finally, verify that the Acquisition interface is not hidden by another application; if it is, close the application that's masking it.
What to do if Carestream HEALTH Dental equipment shows error E1?
If you see error E1 on your Carestream HEALTH Dental equipment, it means the exposure button was released too early. To fix this, start the acquisition again, making sure to hold the exposure button until the acquisition cycle is complete.
What to do if Carestream HEALTH CS 9000 Dental equipment shows error I18?
If you encounter error I18, it indicates that the sensor is not correctly positioned for acquisition. Ensure that nothing is obstructing the sensor's positioning, and then press the reset button.
Why is the exposure button inactive on Carestream HEALTH CS 9000?
If the exposure button on your Carestream HEALTH Dental equipment's X-ray remote control isn't working, it might be because the rotative arm is not in the start position. To resolve this, press the button to reset the rotative arm to its starting position.
What to do if Carestream HEALTH Dental equipment shows error I3?
Release the exposure button on the X-ray remote control of your Carestream HEALTH Dental equipment.
What to do if Carestream HEALTH CS 9000 Dental equipment shows error I16?
This error only occurs in panoramic mode. To resolve this issue on your Carestream HEALTH Dental equipment, raise the chin rest to its maximum height.
What to do if Carestream HEALTH Dental equipment shows error I1?
Wait until the Generator Cooling Indicator on the Acquisition interface of your Carestream HEALTH Dental equipment reaches zero.
What to do if Carestream HEALTH CS 9000 Dental equipment shows error I2?
Wait until the Generator Cooling Indicator on the Acquisition interface of your Carestream HEALTH Dental equipment reaches zero.
What to do if Carestream HEALTH Dental equipment shows error I17?
Wait for the positioning process to finish on your Carestream HEALTH Dental equipment.
Explains special messages and symbols used in the guide.
Provides an overview of the CS 9000 and CS 9000 3D unit components.
Illustrates the up and down movement and rotation of the unit.
Details the functional components of the CS 9000 and CS 9000 3D units.
Shows the locations of the panoramic and 3D digital sensors.
Illustrates the positions of the CS 9000 and CS 9000 3D lasers.
Describes the alphanumeric digital soft touch console for unit control.
Explains the function of the X-ray remote control for image acquisition.
Details accessories and replacement parts for patient positioning.
Lists accessories used for panoramic patient positioning.
Lists accessories used for 3D patient positioning.
Shows indicators on the chin rest base for patient positioning.
Details the minimum system requirements for the imaging software.
Outlines the software components used with the CS 9000 and CS 9000 3D.
Describes the user-friendly working interface for radiological diagnosis.
Details the user-friendly interface for CS 9000 and CS 9000 3D acquisitions.
Explains the main panoramic interface for imaging acquisition functions.
Allows selection of different radiological exams and anatomical zones.
Enables selection of patient parameters influencing image quality.
Allows selection of exposure parameters for radiological image acquisition.
Describes the main 3D interface for imaging acquisition functions.
Allows selection of different radiological exams for 3D imaging.
Enables selection of patient parameters for 3D image quality.
Allows selection of exposure parameters for 3D radiological image acquisition.
Provides step-by-step instructions for powering on the unit.
Guides users on how to access the Panoramic and 3D Acquisition windows.
Details the process for acquiring panoramic, TMJ x2, or sinus images.
Steps to set acquisition parameters before taking panoramic images.
Instructions for preparing and positioning patients for panoramic image acquisition.
Procedure for initiating the X-ray exposure for panoramic image acquisition.
Procedure for acquiring TMJ x4 images for adult and pediatric patients.
Steps for acquiring a single 3D volume image.
Guide on manually setting the single-volume position using dental plaster.
Instructions for patient prep and positioning for 3D single-volume images.
Procedure to initiate X-ray exposure for 3D single-volume image acquisition.
Procedure for acquiring stitched 3D multi-volume images.
Instructions for patient prep and positioning for 3D stitched images.
Procedure to initiate X-ray exposure for 3D stitched image acquisition.
Provides information on radiation dose emission compliance.
Lists common malfunctions, their descriptions, and recommended actions.
Procedure for daily cleaning of the CS 9000 or CS 9000 3D unit.
Instructions for cleaning and disinfecting unit accessories.
Procedure for cleaning and disinfecting components with skin contact.
Steps to maintain and control optimum image quality.
General| Brand | Carestream HEALTH |
|---|---|
| Model | CS 9000 |
| Category | Dental equipment |
| Language | English |
To Next Page
