LIABILITYEXCLUSIONANDDAMAGES
You have acquired a kit which can be assembled into a fully working RC model
whenfittedout with suitable accessories,as described in the buildinginstructions
inthe kit. However, asmanufacturers, weat Composite-ARF are not ina positionto
influence the wayyou build and operate your model, and we have no control over
the methods you use to install, operate and maintain the radio control system
components. Forthis reason weare obligedto denyallliability forloss,damageor
costs which are incurred due to the incompetent or incorrect application and
operation of ourproducts, or which areconnectedwith suchoperationin anyway.
Unlessotherwise prescribed by binding law, theobligation of theComposite-ARF
company to pay compensation is excluded, regardless of the legal argument
employed. This applies to personal injury, death, damage to buildings, loss of
turnover and business, interruption of business or other direct and indirect
consequentdamages. Inallcircumstancesourtotalliability islimited totheamount
which you actuallypaid forthis model.
BY OPERATING THIS MODEL YOU ASSUME FULL RESPONSIBILITY FOR YOUR
ACTIONS.
It is important to understand that Composite-ARF is unable to monitor whether you keep
to the instructions contained in this operatingmanual regardingthe construction, operation
and maintenance of the aircraft, nor whether you install and use the radio control system
correctly. For this reason we at Composite-ARF are unable to guarantee or provide a
contractual agreement with anyindividual or company that the model you have made will
function correctly and safely. You, as operator of the model, must rely upon your own
expertise and judgement in acquiring and operating this model.
SUPPLEMENTARYSAFETYNOTES
Pre-flight checking
Before every session check that all the model’s working systems function correctly, and
be sure to carry out a range check. This is the procedure: switch on the transmitter,
followed by the receiver. Leave the transmitter aerial collapsed and walk away from the
model. At the appropriate range check that all the control surfaces work perfectly when
you move the sticks.
Repeat theprocedure with the engine running, while an assistant holds the model securely.
The first time you fly any new model aircraft we strongly recommend that you enlist the
help of an experienced modeller to help you check the model and offer advice while you
are flying. He should be capable of detecting potential weak points and errors.
Be certain to keep to the recommended CG position and control surface travels; if
adjustments are required, carry them out.
Don’t ignore our warnings or thoseprovided by other manufacturers.They refer
to things and processeswhich, if ignored, can result in fatalinjury or permanent
damage.
To Next Page
Loading...
