INSTALLATION PROCEDURES
1. Installing electronic
rear view mirror.
A. Insert the fastening strap into the raised groove on the
back cover of the mirror in the direction indicated in the
picture below, ensuring that the side of the strap with
the two notches feces outwards, and the indented side
inwards.
Attach the electronic rear view mirror on the original rear
view mirror. Tie the electronic rear view mirror
(already installed with strap and button trap) to the
original rear view mirror.
B. Insert the upper fastening strap into the hole with button
trap below without over-tightening the strap, to leave
room for the original rear view mirror.
To Next Page
Loading...