DESCRIPTION OF FUNCTIONS
Turn ON/OFF.
A. Turn the ignition switch to on, (it is preferably to start the
car and maintain in idle state to avoid excessive
consumption of battery energy).
B. Turn the ignition switch to off. The red LED on the
electronic rear view mirror should go off.
How to turn ON/OFF
the rear view function.
A. When the engine and the mirror monitor are both on, the
image is automatically generated when the
car starts reversing. When reversing is finished, the
mirror monitor will revert to the normal optical
rearview mirror.
B. When not reversing, the mirror monitor can be manually
turned on while parking or driving (the power
must be on) by switching on auxiliary power switch.
C. The mirror monitor can be used as normal optical
rearview mirror while turn off the built-in LCD.
How to play on-board
VCD/DVD/GPS/TV.
A. Make sure the green line is connected with handbrake
line in order to have video display only in brake mode.
B. Make sure the power for on-board
CD/VCD/DVD/GPS/TV system is connected.
C. Make sure the on-board CD/VCD/DVD/GPS/TV system
connected with control box by means of our standard AV
cable. When CD/VCD/DVD/GPS signals input through
the AV-IN port of the control box, the image can be
shown by pressing AV button on the electronic rear view
mirror.
To Next Page
Loading...