Caribe C8 - Caribe Boat Accessories; How to Install the Oars

5/18
STEPS TO INSTALL THE OARS
1)
Mount the pin in the oar, making sure that be on the same side of the blade
2)
With the blade towards
the interior of the boat introduce the pin in the oar lock
and rotate the oar to the stern side.
3)
Verify that the pin has hooked on and does not come out of the oar lock.
4)
Put the paddle of the oar in the blade rest and tighten the telescopic regulator.
ACCESORIES:
Rowing Seat
Document Pocket
Line Retainer
This cut
to the blade-side
Pin
Oar Lock