Need help?Do you have a question about the Carl Valentin VARIO III and is the answer not in the manual?
Details the rear panel connectors and their pin assignments.
Specifies environmental and operational requirements for safe printer use.
Explains the printer's input/output ports and their functions.
Guide for physical placement and initial setup of the printer.
Steps for connecting power, computer, and network cables.
Instructions for the first-time calibration and initialization process.
Step-by-step instructions for loading label rolls in various modes.
Detailed guide for loading the thermal transfer ribbon correctly.
Description of the printer's control panel buttons and display functions.
Configuration options for print speed, intensity, and other print-related parameters.
Settings for label dimensions, gap, column printing, and alignment.
Configuration and operation of the optional label cutter.
Instructions for updating the printer's firmware via memory card.
Method for cleaning the printhead to ensure print quality.
General precautions and overview for printhead replacement.
Step-by-step guide for removing and installing a new printhead.
Procedures for adjusting printhead parallelism and pressure.
Troubleshooting guide for common printer error codes and their solutions.
General| Print Method | Thermal transfer / Direct thermal |
|---|---|
| Max. Print Width | 104 mm |
| Printing Technology | Thermal transfer / Direct thermal |
| Print Width | 104 mm |
| Weight | Approx. 12 kg |
| Resolution | 203 dpi |
| Interfaces | USB, Ethernet |
| Interface | USB, Ethernet |
| Paper Handling | Roll-fed |
To Next Page
