To Next PageTo Next PageWhat to do if the Carlisle MS powder outlet is insufficient?
If your Carlisle Paint Sprayer's powder output is insufficient, there are several potential causes. First, check that the compressed air main supply is sufficient. Also, verify the feed air and dosage air ratio at the controller. Finally, inspect the collector nozzle and propelling nozzle in the injector for wear; replace if necessary.
How to fix Carlisle Paint Sprayer when spray cloud no longer correct?
If the spray cloud from your Carlisle Paint Sprayer is no longer correct, the nozzle system may be worn. Replace the nozzle system.
Why does my Carlisle MS Paint Sprayer have worse wrap around back spray?
If you experience worse wrap around back spray with your Carlisle Paint Sprayer, this could be due to incomplete or no grounding. Refer to the grounding chapter for instructions.
How to troubleshoot no electrostatics and no powder output in a Carlisle MS?
If your Carlisle Paint Sprayer has no electrostatics and no powder output, the fuse on the controller may be defective. Replace the fuse.
Information important for user safety and preventing equipment problems.
Details fire hazards in the spray area and necessary safeguards.
Details explosion hazards in the spray area and necessary safeguards.
Hazards related to electrical discharge and grounding requirements.
Information on handling hazardous materials and chemical safety.
Explanations of ATEX product markings and their significance for safety.
Crucial safety regulations and warnings for electrostatic powder coating operations.
Essential grounding requirements for all conductive parts and work pieces.
Technical details including weight, voltage, pressure, and temperature.
Guides on initial setup and starting the operation of the powder gun.
Essential safety rules for handling the powder spray gun.
Details requirements for proper grounding of the powder coating system.
Lists common problems, causes, and solutions for the powder gun.
General| Model Series | MS Series |
|---|---|
| Manufacturer | Carlisle |
| Pressure Rating | 3000 psi |
| Category | Paint Sprayer |
| Type | Air Assisted Airless |
