Carlsbro CSD120 - Assemble the cymbals

Assemble the cymbals
1）Loosen the butterfly nut on the left side of the HI-HAT.
2）Assemble the HI-HAT cymbal.
3）Tighten the butterfly nut（Note: don't overtighten）
4). Loosen the butterfly nut on the cymbal rod.
5). Assemble the CRASH/RIDE cymbal onto the rod.
6). Tighten the butterfly nut（Note: don't overtighten）
Loosen the square screw
Pad tube
Loosen the
butterfly nut