PRECAUTIONS
• Always exercise care when operating and hand
ling the RT5/RTk5
• Do not disassemble any portion of the RT5/RTk5 , as this will void any product warranty.
• Do not use any power adapter or charging cradle other than the one provided with the tablet
or acquired from the manufacturer or its partners.
• In the unlikely event that abnormal noise, strange odor, or smoke is present, immediately
power down the RT5/RTk5 and disconnect all power sources. Please report
the
problem
to
your device
provider immediately.
OPERATION
P
owering ON and OFF
To activate RT5/RTk5 , push and quickly release the Power Button. The display will come on in a few
seconds. To put the RT5/RTk5 in standby mode, push and quickly release the Power Button. To turn
the RT5/RTk5 off for extended storage, power off safely using any software function that "shuts
down computer" provided in the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power - please use the AC-DC ad
apter
with the RT5/RTk5 when setting up for the first time to fully charge the battery pack.
NOTE:
To conserve power, push and quick release the Power Button to make the tablet in standby mode
while not in use. Pushing briefly on the same button will wake up the system.
NOTE:
When the
battery
pack is charging, the blue-colored
Battery
LED
should blink
slowly.
If plugging in
the AC-DC adapter does not trigger this blinking activity
and the LED stays dark, the
battery
pack(s)
may
have been drained substantially. Unplug/ replug the AC-DC adapter to the RT5/RTk5 a
few times to activate the charging process.
NOTE:
Avoid using
the Power
Button ("hold
4+
seconds"
feature) to turn off the
tablet-this form of
hardware
shutdown is intended
to be a means of recovery from lockups, and not as normal
operation.
3
To Next Page
Loading...
