Start Up
If the power
up
(from Standby mode or otherwise) is successful, the appropriate
interface will
be displayed
after a launch sequence of several seconds. The wireless LAN
connection may take 10-15 seconds to
be
established.
Wireless Networking
Wireless LAN
The RT5/RTk5 is often delivered with an embedded (user-inaccessible) 802.llac LAN
adapter equipped with a hidden custom antenna.
• Through the support of typical WLAN adapters, the RT5/RTk5 sho
uld be
able to
detect all 802.11 access points in the
vicinity
for
you
to select the
access
point
of
your
choice for connection.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters and the access
points
have
to match. The SSID
is
case-sensitive and
it is
recommended that
you
enable WEP/
WPA/WPA2 encryption (or advanced alternatives)
for
secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network
adm
inistrator or your networking equipment literature to properly configure
associated settings such as Authentication mode, etc.
• Refer to
the access point operating manuals for setting up the 802.11 access points.
NOTE:
To ensure the system performance, turn on only the symbologies yo
u are going to use.
4
To Next Page
Loading...
