A
D
E
STEP 9
Attach rear leg assembly (A)
onto rear leg bar (D) ensuring
the holes on the adjustable
legs are facing the same way
as the locking pin and the flat
side to the hand screw (E).
Using the locking pin adjust
the leg to your desired height.
STEP 10
Now fully tighten the hand
screw located on the other
side of the rear leg bar (D),
making sure all hand screws
(E) are fully tightened and
the wheel is running freely.
Repeat step 9 and 10 for the
second rear wheel.
010
To Next Page