Carpigiani K 3 User’s guide
This manual is for the exclusive use of licensees and employees of McDonald’s Systems Inc Page 14 of 63
Version 5: October 2012
2.1.1 MILK SHAKE FUNCTIONS
STOP BUTTON
By pressing this button during operation, the machine stops (LED on).
DISPLAY Comments
16:29:27 Tue
When the machine is in STOP, the display shows Time
and Date.
PRODUCTION BUTTON
Preparation (startup):
On pushing this button, its LED will blink for 15 minutes while the
machine is freezing the product. For that time, dispensing is not allowed.
Production (LED is always on):
The product is ready to be dispensed and it is kept at the
desired consistency by the Hard-o-Tronic system. If the machine has been in the production
mode and then placed in Stop, the 15 minutes start up procedure will be automatically bypassed
if the time in Stop does not exceed 60 minutes; otherwise the start up procedure will be repeated.
By pressing this button when in STOP, the display indicates:
KEY
DISPLAY comments
1
Do Not Serve !
TEV +19°C W-14
When the Milk Shake is not ready, the display shows: “DO
NOT SERVE“
2
Hopper +14°C
Cylinder +13°C
In this box the display shows the Hopper’s temperature in
the first line (above) and the Cylinder’s temperature in the
second one.
3
In this box the display shows in the first line (above):
Set=065: the shake consistency to be reached
Hot=035: the shake consistency actually detected in the
cylinder
Liv=00000 for technician
4
Cones today
12345
In this box the display shows the daily quantity of cones
(starting from 0:00 until 23:59).
5
Total Cones
0923456780
In this box the display shows the total quantity of cones
6
TEV+010 TGV-022
TEC+013 TE1-012
In this box the display shows various probes of the SHAKE
part ( no °C nor °F are displayed).
Pushing PROD again, we return to first display (1).
Set=065 Hot=035
Lev=00000
To Next Page
Loading...