Carpigiani K 3 User’s guide
This manual is for the exclusive use of licensees and employees of McDonald’s Systems Inc Page 58 of 63
Version 5: October 2012
Pump Tube Installation
fase 1
Sanitize the new pumps tubes (ref.385) and lubricate the o-rings on the syrup line fittings.
fase 2
Place the pump tube into the pump body.
Fase 3
Pull up the pump cover to close it.
fase 4
Connect the syrup feed tube into the pump tube fitting.
fase 5
Connect the syrup pickup tube into the pump tube fitting.
fase 6
Replace the syrup jugs.
fase 7
Prime the syrup lines. Dispense one serving of syrup into a cup and discard this portion.
fase 8
Calibrate the syrup system according to the instructions in the equipment manual.
To Next Page
Loading...