• Remove the external HEPA filter by pressing the button (11)
located on the back of the appliance.
• Shake hard dust particles off the filter by gently tapping it against
a hard surface. Remove fine dust particles with a soft brush.
• Rinse the filter under cool running water. Wait until it is completely
dry (approximately 24 hours at room temperature).
• If necessary, wipe the filter installation place with a damp cloth.
• Put the filter back in the vacuum cleaner until it clicks.
Cleaning the external HEPA filter
WARNING!
• Do not use the vacuum cleaner without the dust cup and filters.
• Do not install the dust cup and filters in the vacuum cleaner if they
are not completely dry or damaged.
• Do not wash filters in a washing machine or dishwasher.
• Do not use hair dryers or heating appliances to dry the filters.
EN 8
To Next Page
Loading...