• Before cleaning, unplug the appliance and allow it to cool down.
• Wipe the body of the appliance with a damp cloth and allow it to dry.
• Do not use abrasive cleaners or organic solvents to clean the appliance.
• Do not immerse the appliance in water or turn the appliance on when it is
wet.
• Check the filters and inlet opening for clogging. Clean the filters regularly.
• For easy storage, the hose can be detached from the vacuum cleaner
body.
• Press the button to remove the dust container (8) and pull the cup
upwards.
• Place the dust cup over the dustbin. Open the lid of the container
and empty the dust into the bin.
• If necessary, wipe the dust cup with a damp cloth. Allow the cup
to dry completely.
• Place the dust cup back into the vacuum cleaner.
Cleaning the dust cup
When the suction power decreases, the dust cup must be cleaned.
• Remove the dust cup.
• Remove the internal filter from the holder.
• Rinse the internal filter under running water at room temperature
(max. 40 °C).
• Let the filter dry completely (approximately 24 hours at room
temperature).
• Put the filter back into the vacuum cleaner and replace the dust
cup.
Cleaning the internal filter
06 CLEANING AND MAINTENANCE
EN 7
To Next Page
Loading...