The vacuum cleaner is designed for cleaning floor coverings, as well as for
cleaning hard-to-reach surfaces, furniture, appliances, etc. in residential areas.
• Remove the appliance from its packaging and take the transportation
elements off.
• Do not switch the appliance on immediately if you have brought it from the
street in cold weather; in this case the appliance should be kept at room
temperature for about two hours before switching it on.
• Make sure that the appliance is supplied as specified by the manufacturer
and that all components of the appliance and the appliance itself have not
been damaged during transportation. If the appliance is damaged or does
not function, contact your retailer.
• Make sure that the mains voltage corresponds to the voltage specified in
the technical data of the appliance.
• Insert the hose base (5) into the connector on the housing (6) until it clicks
into place.
03 INTENDED USE
04 BEFORE USE
EN 4
To Next Page
Loading...