10
TESTED AHRI COMBINATION RATINGS
NOTE: Ratings contained in this document are subject to change at any time.
For AHRI ratings certificates, please refer to the AHRI directory www.ahridirectory.org
Additional ratings and system combinations can be accessed via the Carrier database at: www.MyCarrierRatings.com
For performance data at specific application &/or design conditions with various indoor unit co mbinations, the
equipment performance calculator can be accessed at :
http://rpmob.wrightsoft.com/
U N I T S I Z E --- S E R I E S ,
VOLTAGE
INDOOR MODEL
ARI STANDARD RATINGS
FURNACE MODEL
COOLING
CAPACITY
SEER EER
ID CFM
HIGH LOW HIGH LOW
24ACB724A**31 CNPV*3117A** 24,000 21,600 17.0 13.0 835 670 58CV(A,X)090---16
24ACB736A**31 CNPV*4821A** 36,000 29,400 17.0 13.0 1005 835 58CV(A,X)090---16
24ACB748A**31 CNPV*6124A** 48,000 40,000 17.0 13.0 1355 1010 58CV(A,X)135---22
24ACB760A**30 CNPH*6124A** 59,000 48,000 16.5 13.0 1675 1245 5 8 P H * 1 1 0 --- 2 0
AHRI — Air Conditioning, Heating & Refrigerat ion Institute
EER — Energy Efficiency Ratio --- 80_F (26.6_C) indoor db/67_F(19.4_C) indoor wb & 95_F(35_C) outdoor wb.
SEER — Seasonal Energy Efficiency Ratio
TDR — Time---DelayRelay. Inmostcases,only1methodshouldbeusedtoachieveTDRfunction.Usingmorethan1methodinasystemmaycausedegradationinperformance.
Use either the accessory Time ---Delay Relay KAATD0101TDR or a furnace equipped with TDR. Most Carrier furnaces are equipped with TDR.
NOTES:
1. Ratings are net values reflecting the effects of circulating fan motor heat. Supplemental electric heat is not i ncluded.
2. Tested outdoor/indoor combinations have been tested in accordance with DOE test procedures for central air conditioners. Ratings for other combinations are determined under DOE
computer simulation procedures.
3. Determine actual CFM values obtainable for your system by referring to fan performance data in fan coil or furnace coil literature.
4. Do not apply with capillary tube coils as performance and reliability are affected.
24ACB7