What to do if Carrier 38BNB remote is not working?
If your Carrier Air Conditioner does not operate with the remote controller, ensure that the operating switch is in the REMOTE position for model 40BN036. If that's not the issue, replace the batteries in the remote controller. If problems persist, try turning the air conditioner On and OFF using the operation push button or slide switch.
Why is the POWER indicator light not lit on my Carrier 38BNB?
If the POWER indicator light is not lit on your Carrier Air Conditioner, check the electrical connection to ensure it is properly connected. Also, check if the automatic interrupter has switched off and reset it if necessary. Finally, inspect the fuse and replace it if it has burned out.
Why is the FILTER indicator light on my Carrier 38BNB lit?
If the FILTER indicator light is lit on your Carrier Air Conditioner, it means the filters need cleaning. Remove and clean the filters. For model 40BN036, move the operation switch to the OFF position for 5 seconds and then return it to the REMOTE position. For models 40BN018, 024, and 030, press the operation push button continuously for 5 seconds.
What to do if indicator lights on Carrier 38BNB Air Conditioner are behaving strangely?
If the various indicator lights on your Carrier Air Conditioner behave differently than expected, and you have model 40BN018, 024, or 030, press the operation push button continuously for 5 seconds. For model 40BN036, slide the operation slide switch to the OFF position for 5 seconds and return it to REMOTE. If the problem persists, restart the air conditioner.
Overview of the duct-free system, its features, and components like the remote control.
Detailed instructions on using the remote control for system setup and operation.
Steps to select the desired fan speed or set it to Auto mode.
Guidance on adjusting the desired temperature using the remote control.
Instructions for changing the airflow direction using the remote control.
Procedure to set the current time on the remote control.
How to program timer periods for automatic system operation.
Instructions for setting the sleep timer to adjust temperature gradually.
Procedure to program the system for timed operation within a 24-hour period.
Steps to cancel a previously set daily timer program.
How to cancel individual timer periods (start/stop times).
Procedure to cancel all programmed timer settings.
How to display the current room air temperature on the remote.
How to delay the start or stop function by one-hour increments.
Using the remote to transmit room temperature for unit operation.
Instructions for removing, cleaning, and replacing air filters.
Guidance on cleaning the front panel of the indoor unit.
Steps for cleaning the indoor unit's cooling coil fins.
Procedure for cleaning the outdoor unit's coil.
Instructions for cleaning condensate drains at the start of the cooling season.
Configuration of DIP switches on the remote control for system characteristics.
General| Brand | Carrier |
|---|---|
| Model | 38BNB |
| Category | Air Conditioner |
| Language | English |
To Next Page
