To Next PageTo Next PageWhat to do if Carrier Air Conditioner shows high/low voltage protection on compressor terminal?
If your Carrier Air Conditioner's compressor terminal shows high or low voltage protection errors, the first step is to check the voltage levels. Ensure that the power supply to the unit is stable and within the recommended range.
General| Refrigerant | R-410A |
|---|---|
| Voltage | 208/230V |
| Phase | 1 |
| Compressor Type | Inverter |
| Stages | Variable |
| Outdoor Unit Noise Level | 55 dB(A) |
| Cooling Capacity | 24000 BTU/h |
| Heating Seasonal Performance Factor (HSPF) | 10.0 |
| Operating Temperature (Cooling) | 5°F - 122°F |
| Outdoor Unit Dimensions (H x W x D) | 35.4 x 12.6 inches |
Specific safety warnings including electrical, explosion, and equipment damage hazards.
Instructions for running, cutting, and flaring refrigerant piping.
Connecting refrigerant pipes to the indoor and outdoor units.
Testing the refrigerant lines for leaks using nitrogen pressure.
Procedure for removing air and moisture from the refrigerant circuit.
Wiring the outdoor unit power supply and communication lines.
Explanation of diagnostic codes and LED indicators for troubleshooting.
