38MGRBQ: Service Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
103
6 EXPANSION VALVE REMOVE THE EXPANSION VALVE REMARKS
1. Perform the steps from sections 1 and 2.
2. Remove the electrical parts as described in section 3.
3. Remove the coil.
4. Detach the welded parts of the expansion valves and pipes.
No. PART NAME PROCEDURES REMARKS
1 FAN ASSEMBLY REMOVE THE FAN ASSEMBLY
1. Turn off the air conditioner. Turn off the power breaker.
2. Remove the 8 air outlet grille screws.
3. Remove the hex nut securing the fan.
4. Remove the fan.
5. Remove the 4 top cover screws, then remove the top cover.
Ĺ
To Next Page
Loading...
