Need help?Do you have a question about the Carrier 38NYV035H and is the answer not in the manual?
General| Refrigerant | R-410A |
|---|---|
| Voltage | 208/230V |
| Phase | 1 |
| SEER | Up to 20.5 |
| HSPF | Up to 10.0 |
| Power Supply | 208/230V, 1 Phase, 60Hz |
| Cooling Capacity | 35000 BTU/h |
| Heating Capacity | 36000 BTU/h |
| Operating Temperature (Heating) | 75°F |
Precautions for R410A refrigerant, material compatibility, and installation tools.
Detailed technical specifications for indoor and outdoor units, including capacities, power, noise, and dimensions.
Graphs illustrating cooling and heating performance curves based on compressor speed and outdoor temperature.
Detailed diagrams of the indoor unit, showing dimensions and installation features.
Detailed diagrams of the outdoor unit, showing dimensions, component placement, and installation.
Diagrams showing the placement and connections for installing indoor and outdoor units.
Guidelines for selecting an appropriate installation location for the indoor unit.
Detailed instructions on flaring copper pipes for R410A refrigerant, including dimensions and techniques.
Procedure to check for gas leaks at flare nut connections using a detector or soapy water.
Safety warnings for handling the new inverter, emphasizing high voltage and uninsulated construction.
Interprets flashing patterns of indoor unit LEDs to diagnose protective circuit operations and errors.
Steps to set the remote controller to service mode for accessing check codes and diagnosing faults.
Instructions for removing and reassembling the front panel of the indoor unit.
Procedure for checking and removing the inverter assembly, including discharging capacitors.
Procedure for removing and reassembling the compressor, including refrigerant extraction and bolt tightening.
To Next Page
