To Next PageTo Next Page
Need help?Do you have a question about the Carrier 38TDB and is the answer not in the manual?
General| Brand | Carrier |
|---|---|
| Model | 38TDB |
| Category | Air Conditioner |
| Language | English |
Describes electrical connection details for single-phase units.
Lists the available nominal sizes for residential applications.
Details advanced controls for temperature, humidity, IAQ, and zoning.
Explains the three-component system for cabinet protection and durability.
Outlines the five-year parts and ten-year compressor warranty.
Lists available optional accessories with their ordering numbers and descriptions.
Describes a filter for protecting the coil from salt damage in coastal areas.
Explains the sensor for remote outdoor temperature display at the thermostat.
Details stick-on feet that raise the unit for debris flushing and corrosion minimization.
Describes the TXV's role in metering refrigerant flow and its installation requirements.
Details combination ratings with a specific variable-speed furnace model.
Lists multipliers to adjust capacities when using different indoor sections.
Specifies outdoor installation requirements for free-air inlet and outlet.
States the minimum temperature for outdoor operation.
States the maximum temperature for outdoor operation.
Defines the allowable elevation difference between indoor and outdoor units.
Provides guidelines for buried refrigerant tubing and vertical rises.
Specifies the acceptable wire material for electrical connections.
Mandates the use of approved TXVs for proper application.
Prohibits the use of capillary tube coils with these units.
Requires the installation of the factory-supplied filter drier.
Details the unit's composition, function, and intended use in refrigeration systems.
Outlines the standards and certifications the unit meets for performance and safety.
Specifies recommendations for unit shipment, storage, and handling.
States the warranty coverage available in the U.S. and Canada.
Describes the main components and factory-assembled nature of the unit.
Identifies the refrigerant type and its environmental compliance.
Details the construction materials and finish of the unit cabinet.
Describes the condenser fan type and its motor specifications.
Specifies the type and mounting of the hermetic compressor.
Describes the construction of the air-cooled condenser coil.
Lists the components included in the refrigeration circuit.
Defines key operating parameters like capacity and power consumption at specific conditions.
Outlines the unit's nominal electrical characteristics and voltage limits.
Refers to other sections for information on accessories and enhancements.
