EasyManua.ls Logo

Carrier 38VT 188CTST Series - Standby and Initial Operation; Selecting Operation Mode and Fan Speed; Setting Temperature; OFF Timer Operation

Carrier 38VT 188CTST Series
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 9 –
Weight centre of an outdoor unit
Weight center of an outdoor unit
No. Model type X (mm) Y (mm) Z (mm) Mass (kg)
A 510 370 650 223
B 680 360 650 294
C 690 340 680 329
CAUTION
Handle the outdoor unit carefully, observing the following items.
When using a forklift truck or other machinery for loading/unloading in transportation, insert the fork of the
forklift truck into the rectangular holes for handling as shown below.
When lifting up the unit, insert a rope able to bear the unit’s weight into the rectangular holes for handling, and
tie the unit from 4 sides.
(Apply padding in positions where the rope comes into contact with the outdoor unit so that no damage is
caused to the outer surface of the outdoor unit.)
(There are reinforcing plates on the side surfaces, so the rope cannot be passed through.)
5 Carrying in the outdoor unit
38VT008188¾
38VT010188¾
38VT012188¾
38VT014188¾
38VT014A88¾
38VT016188¾
38VT018188¾
38VT020188¾
38VT022188¾
38VT024188¾
38VT026188¾
Fork of the
forklift truck
Rectangular
holes for
handling
Correct
Side
Incorrect
Correct
Plaster
board
Rectangular
holes for
lifting
Rope
Incorrect
Reinforcing
plate
Incorrect
Front/Back
B CA
990
780
1290
780
1290
780
1690
1690
1690

Other manuals for Carrier 38VT 188CTST Series

Related product manuals