EasyManua.ls Logo

Carrier 40GKX028 703-40 Series - User Manual

Carrier 40GKX028 703-40 Series
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
40 GKX
INSTALLATION MANUAL
Question and Answer IconNeed help?

Do you have a question about the Carrier 40GKX028 703-40 Series and is the answer not in the manual?

Carrier 40GKX028 703-40 Series Specifications

General IconGeneral
Model40GKX028 703-40 Series
Series40GKX
Cooling Capacity28, 000 BTU/h
RefrigerantR-410A
Voltage208/230V
Phase1
Power Supply60 Hz
Compressor TypeRotary
Weight (Outdoor Unit)110 lbs

Summary

General Information

Unit Installation Guidelines

Instructions for installing the unit safely and correctly, following national regulations and manufacturer guidelines.

Installation Avoidance - Part 1

Installation Avoidance - Part 2

Installation Best Practices

Unit Positioning and Airflow

Install unit centrally for optimal airflow and adjust louvres for cooling or heating mode.

Installation Procedure

Pre-Installation Preparation

Advises on handling unit, checking packaging, and preparing the mounting structure including hangers.

Mounting and Levelling

Details lifting the unit, fitting it into the false ceiling, and aligning/levelling it using threaded hangers.

Installation Details

Connecting Pipes and Conduits

Guidance on drilling the wall for connection pipes and conduits, ensuring a slight slope.

Condensate Drain Pipe Setup

Ensures correct condensate flow with a 2% gradient, odour trap, and proper insulation.

Grille and Frame Assembly

Instructions for attaching the grille/frame assembly to the unit, ensuring proper alignment and sealing.

Refrigerant Connections

Pipe Connection and Torque

Details on connecting refrigerant pipes using correct torque and tools to prevent leaks or damage.

Electrical Connections

Power Supply and Grounding

Ensures main power supply via a switch with safe contact gap and proper grounding connection.

Wiring Diagrams

Unit Wiring Diagrams

Control Configuration and Operating Test

Maintenance Procedures

Related product manuals