Need help?Do you have a question about the Carrier 40GKX048 703-40 Series and is the answer not in the manual?
General| Model | 40GKX048 703-40 Series |
|---|---|
| Cooling Capacity | 48, 000 BTU/h |
| Energy Efficiency Ratio (EER) | 10.5 |
| Refrigerant | R-410A |
| Voltage | 208/230V |
| Phase | 1 |
| Compressor Type | Scroll |
| Power Supply | 208/230V/1Ph/60Hz |
| Operating Ambient Temperature | 125°F |
| Series | 703-40 Series |
Instructions for installing the indoor unit, covering electrical, piping, and safety requirements.
Recommendations and considerations for choosing an optimal location for the unit, avoiding detrimental environmental factors.
Critical warnings and best practices to avoid during the installation process to ensure proper function and longevity.
Detailed instructions for mounting, securing, and connecting the indoor unit within the ceiling structure.
Detailed wiring diagrams illustrating connections for cooling-only and heat pump units, with and without electric heaters.
Details on the air intake grille, including its function and components for fresh air management.
Guidance on how to direct conditioned air to an adjacent room, including necessary kits and considerations.
Instructions for installing the fresh air intake, including baffle placement and securing the grille assembly.
Steps for configuring the remote control and setting up the system communication and initial parameters.
Instructions for performing an initial operational test of the unit to verify its functionality and performance.
Procedure for cleaning and replacing air filters, distinguishing between washable and non-washable types.
Steps to take before starting the air conditioner after a period of prolonged shutdown, including inspections.
Covers access to the electric panel, removal of the condensate drain pan, and other component maintenance.
Information for the owner on main operating modes, remote control functions, and keeping manuals for future reference.
To Next Page