To Next PageTo Next PageWhat to do if my Carrier 40GVC compressor has a start-up failure?
If your Carrier Air Conditioner compressor fails to start, begin by checking the resistance of the compressor and the resistance to ground to ensure they are normal. If the resistance checks out, the issue might stem from a defective outdoor main board.
How to fix Carrier 40GVC indoor board malfunction?
If your Carrier Air Conditioner's indoor board is malfunctioning, the suggested solution is to replace the indoor main board.
How to fix Carrier Air Conditioner indoor PCB malfunction?
If your Carrier Air Conditioner's indoor PCB is malfunctioning, replace the indoor main board.
What to do if my Carrier 40GVC Air Conditioner indoor motor malfunction?
If your Carrier Air Conditioner indoor motor is malfunctioning, check the motor mounting and wiring.
What to do if Carrier 40GVC Air Conditioner return air temperature sensor malfunction?
If your Carrier Air Conditioner's return air temperature sensor is malfunctioning, measure the resistance value in the sensor.
What to do if Carrier 40GVC indoor pipe temperature sensor malfunction?
If your Carrier Air Conditioner's indoor pipe temperature sensor is malfunctioning, measure the resistance value in the sensor.
What to do if my Carrier 40GVC Air Conditioner has system overload protection?
If your Carrier Air Conditioner system is experiencing overload protection issues, examine the heat exchangers for any dirt or blockages.
What to do if my Carrier 40GVC has compressor overload protection?
If your Carrier Air Conditioner compressor is experiencing overload protection, check the overload wiring.
Why is my Carrier 40GVC showing anti-freeze protection?
If your Carrier Air Conditioner shows an anti-freeze protection error, this indicates that the outdoor ambient temperature is too low.
General| Refrigerant | R-410A |
|---|---|
| Voltage | 208-230V |
| Power Supply | 60 Hz |
| Air Flow (Indoor Unit) | Varies by model |
| Dimensions (Indoor Unit) | Varies by model |
| Weight (Indoor Unit) | Varies by model |
Summarizes safety warnings, including personal injury, death, and property damage hazards, and defines precaution levels.
Details the available operating modes like Auto, Cool, Dry, Fan, and Heat for the high-wall fan coil unit.
Detailed steps for installing and replacing batteries in the remote control.
Highlights electrical shock, equipment damage, and cut hazards during maintenance.
Lists common problems and their possible causes and solutions for the unit.
