Carrier 40MBQB09C-3 User Manual

5. USING THE REMOTE CONTROL
__
@
®-
©
®
--G
-®
O
®
keeping on for 2 seconds, and then be off for
2 seconds by turns. Press ON/OFF,SLEEP,
FP, MODE, FAN SPED,UP, DOWN button
while operating will cancel the freeze
protection function.
Under Intelligent eye function, with the
built-in infrared sensor, the unit can detects
existence of humans in the room. If the unit
keep detecting no human activity for 30 min,
it will automatically enters standby(monitor)
status in order to save electricity. And the
unit will automatically start and resume
operation if sensing human activity again.
TIMER ON Button
Press this button to initiate the auto-on time
sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When
the setting time displays 10, each press will
increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program,
simply adjust the auto-on time to 0.0.
TIMER OFF Button
Press this button to initiate the auto-off time
sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When
the setting time displays 10, each press will
increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program,
simply adjust the auto-off time to 0.0
®
Swing <_1>Button
Used to stop or start vertical louver movement
and set the desired left/right air flow direction.
The vertical louver changes 6 degree in angle
for each press. And the temperature display
area of indoor unit displays _r_r__for one
second. If keep pushing more than 2 seconds,
the vertical louver swing feature is activated.
And the display area of indoor unit displays
iili 7 , flashes four times, then the tempera-
ture setting reverts back. If the vertical louver
swing feature is stopped, it displays _LC _ and
remains on for 3 seconds.
10

Carrier 40MBQB09C-3 Specifications

General

Brand	Carrier
Model	40MBQB09C-3
Category	Air Conditioner
Language	English