38
DISASSEMBLY INSTRUCTIONS (CONT)
Indoor Unit (Front Panel) (Cont)
Procedure Illustration
5)
Remove 1 screw and then remove the
electrical cover (see CJ_OP_INV_005).
6) Disconnect the two connectors for the
display board (see CJ_OP_INV_005) .
7) Slid the front panel side to side to
release each axis (see CJ_OP_INV_006 )
8) Remove one screw and rotate the
display board clockwise. Next, remove
the clips. (see CJ_OP_INV_007).
CJ_OP_INV_005
CJ_OP_INV_006
CJ_OP_INV_007
To Next Page
Loading...
