Carrier 42K - Outdoor Units Dimensions & Weights

12
Technical Specifications (Cont.)
System type
Heat pump
System model
53QDMT48-518 53QDMT60-518
Indoor unit model
42QDMT48-718 42QDMT60-718
Outdoor unit model
38QDMT48-518 38QDMT60-518
Cooling capacity
Btu/hr
44500 52300
kW
13.04 15.33
Rated input - cooling W
4200 4725
Rated current - cooling A
7.5 8.3
E.E.R. – Cooling
Btu/wh
10.59 11.07
W/W
3.10 3.24
Heating capacity
Btu/hr
47500 55300
kW
13.92 16.21
Power input (Outdoor + Indoor) - Heating W
3795 4155
Current input (Outdoor + Indoor)-Heating A
6.7 7.6
C.O.P - Heating W/W
3.67 3.90
Indoor unit
42QDMT48-718 42QDMT60-718
Nominal actual wet air flow (high/med/low)
( @ 0 external static pressure )
cfm
1370 / 1260 / 715 1470 / 1375 / 860
m
3
/hr
2322 / 2136 / 1212 2492 / 2331 / 1498
Indoor maximum external static pressure
in.wg
0.40 0.40
Pa
100 100
Sound Pressure (high/med/low) dB(A)
48.2 / 44.1 / 38.4 50.4 / 47.1 / 41.5
Net Dimensions (W×H×D) mm
1200 × 300 × 865 1200 × 300 × 865
Net Weight kg
47 47
Outdoor unit
38QDMT48-518 38QDMT60-518
Tropical compressor type
Scroll Scroll
Refrigerant type / Coupler type
R22 / Flare R22 / Flare
Sound pressure dB(A)
68 69
Net Dimensions (W×H×D) mm
860 × 1150 × 350 860 × 1150 × 350
Net Weight kg
90 92
Pipe connection sizes ( inch )
Liquid
3/8” 3/8”
Gas
3/4” 3/4”
Maximum pipe length m
30 30
Maximum height difference m
15 15
Condensate drain hose diameter mm
25 25
Power supply V/ph/Hz
380-420/3/50 380-420/3/50
* Cooling Capacity, Dehumidification and Energy Efficiency Ratio (EER) based on EN 14511 / ISO 5151 Standards at conditions :
35ºC ambient Temperature. 27/19ºC db/wb Indoor Temperature. Hi
g
h Air Flow
380 volts power supply (for sizes 48K-60K) Three Phase.
* Systems work in cooling at high ambient temperature up to 52ºC
* Heating Capacity and Coefficient Of Performance (COP) are based on EN 14511 / ISO 5151 Standards at operating conditions :
20ºC db Indoor Temperature 7/6ºC db/wb Outdoor Temperature. High Air Flow
400 volts power supply (for sizes 48K-60K).
* For detailed air flow, static pressure and sound performance, see next pages
* For detailed cooling and heating performance, see next pages
* Carrier is committed to continuously improving its products according to national and international standards
to ensure the highest quality and reliability standards, and to meet market regulations and requirements.
All specifications subject to change without prior notice according to Carrier policy of continuous development.