Carrier 48TC*D08 - Page 86

86
Table 33 – Torque Values
Supply fan motor mounting
120 ¦ 12 in --- lbs 13.5 ¦ 1.4 Nm
Supply fan motor adjustment plate
120 ¦ 12 in --- lbs 13.5 ¦ 1.4 Nm
Motor pulley setscrew
72 ¦ 5 i n --- l b s 8.1 ¦ 0.6 Nm
Fan pulley setscrew
72 ¦ 5 i n --- l b s 8.1 ¦ 0.6 Nm
Blower wheel hub setscrew
72 ¦ 5 i n --- l b s 8.1 ¦ 0.6 Nm
Bearing locking collar setscrew 65 to70 in --- lbs 7.3 to 7.9 Nm
Compressor mounting bolts 65 to75 in --- lbs 7.3 to 7.9 Nm
Condenser fan motor mounting bolts
20 ¦ 2 i n --- l b s 2.3 ¦ 0.2 Nm
Condense r fan hub setscrew
84 ¦ 1 2 i n --- l b s 9.5 ¦ 1.4 Nm
48TC