Carrier 50ZP024 - Page 2

2
REQUIRED CLEARANCE FOR OPERATION AND SERVICING
INCHES [mm]
CONDENSER . COIL ACCESS SIDE..............................................30.00 [762.0]
POWER ENTRY SIDE....................................................................30.00 [762.0]
(EXCEPT FOR NEC REQUIREMENTS)
UNIT TOP.......................................................................................48.00 [1219.2]
SIDE OPPOSITE DUCTS ..............................................................30.00 [762.0]
LEGEND
NEC – National Electrical Code
NOTES:
1. Clearances must be maintained to prevent recirculation of air from outdoor-
fan discharge, with the exception of the condenser coil (36.00 in [914.0 mm]. A
removable fence or barricade requires no clearance.
2. Dimensions are in inches. Dimensions in [ ] are in millimeters.
REQUIRED CLEARANCE TO COMBUSTIBLE MATL.
INCHES [mm]
TOP OF UNIT.........................................................................................0
DUCT SIDE OF UNIT.............................................................................0
SIDE OPPOSITE DUCTS ......................................................................0
BOTTOM OF UNIT .................................................................................0
NEC. REQUIRED CLEARANCES.
INCHES [mm]
BETWEEN UNITS, POWER ENTRY SIDE ....................................42.00 [1066.8]
UNIT AND UNGROUNDED SURFACES, POWER ENTRY SIDE .36.00 [914.0]
UNIT AND BLOCK OR CONCRETE WALLS AND OTHER
GROUNDED SURFACES, POWER ENTRY SIDE.........................42.00 [1066.8]
[1295.0]
50.98
31.99
[812.5]
14.0 DIA.
[356.0]
16.06
[408.0]
11.57
[294.0]
9.75
[247.6]
2.72
[69.0]
21.61
[594.0]
1.75 DIA.
[44.5]
0.88 DIA.
[22.2]
17.60
[447.0]
1.20
[30.6]
1.0540 I.D x .50 DEEP
[26.772 x 12.7]
19.61
[498.1]
2.50
[63.5]
C00002
Fig. 2 -- Base Unit Dimensions, 50ZP024--036
UNIT ELECTRICAL CHARACTERISTICS
UNIT WEIGHT CENTER OF GRAVITY IN. (MM)
lb kg X Y Z
50ZP024 208/230--1--60 219 99
355.6
(14.00)
508.0
(20.00)
241.3
(9.50)
50ZP030 208/230--1--60 226 103
355.6
(14.00)
508.0
(20.00)
241.3
(9.50)
50ZP036 208/230--1--60, 208/230--3--60 234 106
355.6
(14.00)
508.0
(20.00)
241.3
(9.50)
50ZP