To Next PageTo Next Page
Need help?Do you have a question about the Carrier 50TC and is the answer not in the manual?
General| Model | 50TC |
|---|---|
| Category | Air Conditioner |
| Refrigerant | R-410A |
| Voltage | 208/230V |
| Compressor Type | Scroll |
| Refrigerant Type | R-410A |
| Sound Level (Outdoor Unit) | 72 dB |
| Dimensions (Outdoor Unit) | 35 x 31 x 31 inches |
| Weight (Outdoor Unit) | Varies by model |
Details field-convertible airflow, lighter units, and compatible curbs.
Highlights quick access handles, "no-strip" screw system, and pressure reading access.
Mentions master terminal board, low voltage connections, and standard components like filter driers.
Explains how economizers save money and provide ventilation.
Details how CO2 sensors improve productivity and save money via DCV.
Explains their role in safety and factory installation options.
Describes coil protection from hail and incidental contact.
Explains how it reduces installation costs and provides power.
Describes its OSHA compliance and safety function for technicians.
Highlights superior internal building pressure control.
Describes controller for performance, zoning, and digital accessories.
Explains connection to BAS without translators.
Details compressor protection against short-cycling.
Explains detection of filter clogs or fan motor failure.
Describes admitting up to 100% outside air for ventilation.
Offers an economical way to bring in ventilation air.
Details dual dehumidification modes for improved comfort.
Controls coil head pressure based on outdoor ambient temperature.
Extends low ambient cooling limit to 25°F (-4°C).
Provides factory-installed combinations for motor and drive needs.
Ensures proper connection and seal for routing wire and piping.
Offers field-installed accessory heaters for various applications.
Specifies minimum outdoor temperatures for safe operation.
States the maximum outdoor temperature for reliable cooling.
Details airflow limits for safe and reliable operation.
Discusses economizers for reduced expenses and ventilation.
Assures confidence in using the full BHP range for motors.
Advises on correct sizing to avoid oversizing issues and improve performance.
Covers cooling with economizers or accessory low ambient controls.
Explains the winter start kit's function for low ambient limits.
Provides electrical data for 3-ton models.
Provides electrical data for 4-ton models.
Provides electrical data for 5-ton models.
Provides electrical data for 6-ton models.
Provides electrical data for 7.5-ton models.
Provides electrical data for 7.5-ton 2-stage models.
Provides electrical data for 8.5-ton models.
Provides electrical data for 10-ton models.
Provides electrical data for 10-ton 2-stage models.
Provides electrical data for 12.5-ton 2-stage models.
Details MCA/MOCP for 3-ton models without convenience outlets.
Details MCA/MOCP for 4-ton models without convenience outlets.
Details MCA/MOCP for 6-ton models without convenience outlets.
Details MCA/MOCP for 7.5-ton models without convenience outlets.
Details MCA/MOCP for 8.5-ton models without convenience outlets.
Details MCA/MOCP for 10-ton models without convenience outlets.
Details MCA/MOCP for 12.5-ton models without convenience outlets.
Details MCA/MOCP for 3-ton models with convenience outlets.
Details MCA/MOCP for 4-ton models with convenience outlets.
Details MCA/MOCP for 6-ton models with convenience outlets.
Details MCA/MOCP for 7.5-ton models with convenience outlets.
Details MCA/MOCP for 8.5-ton models with convenience outlets.
Details MCA/MOCP for 10-ton models with convenience outlets.
Details MCA/MOCP for 12.5-ton models with convenience outlets.
Describes the basic sequence of operation for the unit.
Details operation for cooling and heating without economizer.
Explains cooling and heating operation with economizer.
Describes improved dehumidification modes.
Outlines schedules for HVAC equipment.
Details insulation requirements for unit compartments.
Covers sensors, transmitters, and thermostats for HVAC control.
Specifies requirements for DDC systems and controllers.
Specifies requirements for standard 2-inch fiberglass filters.
General requirements for self-contained AC units.
