GB - 7
ENGLISH
Fan only
1
2
3
4
5
If the air conditioner is to be used in
the fan only mode (ventilation) the
outdoor unit can be placed either
outside or inside the room.
Plug the unit in.
Open the air flow direction guide vane.
Turn the mode selector to the high or
low fan speed symbol.
The fan speed indicator light on the
control panel is illuminated.
The unit will now operate in the fan
only mode.
The room air is drawn in through the
side grilles of the air conditioner,
filtered and cleaned and then
returned to the room through the
front and rear air supply grilles.
Cleaning
To clean the appliance use only a damp
cloth and soap.
Never use spray or flammable liquids.
Periodically clean the air filters in the
sides of the unit.
To pull out the filters from their position
use the tab on the outside edge.
First clean the filters with a vacuum
cleaner then rinse and dry the filters.
Reinsert the filters correctly in their
position.
When bringing the outdoor unit indoors
tilt it to drain any remaining condensate.
Empty the remaining condensate water
through the drain tube at the back of
the indoor unit, then plug the tube and
stow it.
PETROL
TURBO
SILENT
To Next Page
Loading...
