8
red “X” over the bars indicates no connection to the home Wi-Fi
network.
A170246
• Pressing on the Connectivity Status bars from the Home Screen will
allow you to view the Remote Access Status screen.
A13260C
NOTE: If the Infinity System Control is not connected to the home
network, a red “X” will appear over the strength bars. If the Infinity
System Control is connected to the home Wi-Fi network but loses
connection to the MyInfinity Server, a triangle will appear over the
strength bars as depicted in the image below. Connection strength to the
home Wi-Fi network will continue to be displayed by the number of solid
bars. If this problem persists, please contact 1-800-Carrier for assistance.
Strong Connection
Limited Connection Poor Connection
No Connection
To Next Page
Loading...
