NOTES:
1. This feature is standard in the 23XRV controls, but requires a
controller with a non-grounded 4 to 20 mA or 1 to 5 vdc output
signal, not by Carrier.
2. This feature is standard in the 23XRV controls, but requires an
external controller with a non-grounded 4 to 20mA output signal,
not by Carrier.
3. This feature is standard in the 23XRV controls, but requires a
sensor package option, by Carrier. (Item #3 see option listing.)
4. This feature is standard in the 23XRV controls. Controllers moni-
toring this signal must have a non-grounded input with a maxi-
mum impedance of 500 ohms.
5. See Fig. 71 for P compressor control panel component layout.
To Next Page
Loading...
