To Next PageTo Next Page
Need help?Do you have a question about the Carrier Aquasnap 30RQ 080R and is the answer not in the manual?
General| Cooling Capacity | 80 kW |
|---|---|
| Compressor Type | Scroll |
| Refrigerant | R-410A |
| Power Supply | 400V/3Ph/50Hz |
| Operating Range | -10°C to 45°C |
Detailed physical characteristics like sound levels, dimensions, weight, and components.
Key electrical parameters such as voltage, current, power, and start-up current.
Specific electrical data for the unit's hydraulic module and pumps.
Electrical specifications and performance data for the compressors.
Requirements for the power supply, voltage range, and warnings.
Guidelines for selecting appropriate electrical cable sizes and types.
Defines the acceptable ambient and water temperatures for unit operation.
Key recommendations for safe and efficient hydraulic circuit connections.
Schematics and details for connecting the hydraulic module and water circuits.
Configuration for variable speed pumps using pressure differential control.
Configuration for variable speed pumps using temperature difference control.
Graphs showing available static pressure for different unit sizes and flow rates.
Comprehensive pre-start checks including installation, wiring, and safety devices.
Procedures and precautions for the initial start-up and testing of the unit.
Key checks for compressors, hydraulics, and refrigerant charge.
Summary table of available options, their numbers, descriptions, and advantages.
Basic maintenance tasks that can be performed by the user.
More advanced maintenance requiring specific expertise in electrical, hydraulic, and mechanical systems.
Highly specialized maintenance requiring manufacturer or authorized personnel.
How to check refrigerant charge and its effect on performance.
Checks for shipping damage and its impact on start-up.
Final checks before starting the unit, including pump cabling and oil level.
Procedure for measuring and comparing pressure drop to determine flow rate.
Recording of key operating temperatures and pressures after stabilization.
