EasyManua.ls Logo

Carrier Comfort 59SC5B060E14-12 User Manual

Carrier Comfort 59SC5B060E14-12
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Product Data
A11263
The 59SC5B Multipoise Comfort
Condensing Gas Furnace features
SEER--boosting year--round electrical efficiency when paired with a
compatible condensing unit. Energy efficiency is at the heart of this
furnace with up to 96.5% AFUE, gas efficiency and the
electrically-efficient fixed-speeds, constant torque (FCT) ECM blower
motor. This gas furnace also features 4-way multipoise installation
flexibility, and is available in eleven model sizes. All sizes except the
26,000 BTUH model can be vented for direct vent/two-pipe, ventilated
combustion air, or single-pipe applications. The 26,000 BTUH model
can use the same 2-pipe venting system using outside air for combustion,
but is not considered direct-vent. All sizes are design certified in Canada,
and select sizes are certified for mobile/manufactured home use with
conversion kit accessory.
PERFORMANCE
Fixed-speeds, constant torque (FCT) ECM blower motor for
electrically efficient operation all year long in heating, cooling and
continuous fan operation.
Single-speed inducer motor, and single-stage gas valve.
Silicon Nitride PowerHeat
Hot Surface Igniter.
Dual fuel capable HybridHeat
with a compatible heat pump and
thermostat for energy-saving heating performance
Adjustable blower speed for heating and cooling.
Aluminized-steel primary heat exchanger.
Stainless-steel condensing secondary heat exchanger.
INSTALLATION FLEXIBILITY
4-way multipoise design for upflow, downflow or horizontal
installation, with unique vent elbow for optional venting
through-the-cabinet downflow venting capability.
Factory-configured ready for upflow applications.
Ideal height 35(889 mm) cabinet: short enough for taller coils, but
still allows enough room for service.
Two-pipe venting, single-pipe venting or ventilated combustion air.
APPLICATIONS
Approved for Twinning applications with accessory kit (060E17--14,
080E17--16, 080E21--20, 100E21--20, 120E24--22, 140E24--22
models, only).
Approved for Manufactured Housing/Mobile Home applications with
MH accessory kit.
Convertible to propane with gas conversion accessory kit.
CERTIFICATIONS
All sizes meet ENERGY STAR
®
Verizon 4.1 criteria for gas furnaces:
95%+ AFUE.
Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air
leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with
ASHRAE standard 193.
All sizes can be installed in air quality management districts with a 40
ng/J NOx emissions requirments.
A200351
59SC5B
Comfort™ 95 Single-Stage, 4-Way Multipoise,
Condensing Gas Furnace
Question and Answer IconNeed help?

Do you have a question about the Carrier Comfort 59SC5B060E14-12 and is the answer not in the manual?

Carrier Comfort 59SC5B060E14-12 Specifications

General IconGeneral
Model59SC5B060E14-12
TypeGas Furnace
BrandCarrier
SeriesComfort
Heating Capacity60, 000 BTU/h
Input BTU/h60, 000 BTU/h
Output BTU/h57, 000 BTU/h
Efficiency Rating95% AFUE
Blower Motor TypeMulti-Speed
Fuel TypeNatural Gas
Ignition TypeHot Surface Ignition
Heat Exchanger MaterialAluminized Steel
Warranty10-Year Limited Warranty

Summary

FEATURES AND BENEFITS

HYBRID HEAT Dual Fuel System

System switches between gas furnace & heat pump for economical heating.

Power Heat Igniter

Carrier's unique SiN igniter for robust & reliable ignition.

Comfort ECM Blower Motor

ECM motor for enhanced efficiency, uses less power than PSC motors.

Reliable Heat Exchanger Design

Aluminized steel primary & stainless steel secondary heat exchangers.

MODEL NUMBER NOMENCLATURE

SPECIFICATIONS

ACCESSORIES

DIMENSIONAL DRAWING

MAXIMUM ALLOWABLE EXPOSED VENT LENGTH

Venting System Length Calculations

Example 1

Calculation for a 60,000 BTUH furnace using 2" vent piping.

Example 2

Calculation for a 60,000 BTUH furnace using 60mm polypropylene vent piping.

MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS

TYPICAL WIRING SCHEMATIC

GUIDE SPECIFICATIONS

General

Basic info on system, quality, delivery, storage, handling, and warranty.

Equipment

Details on blower motor, filters, casing, heat exchangers, and controls.

Electrical Requirements

Specifications for voltage, frequency, phase, wire size, and breaker.

Related product manuals