9
Operating the Thermostat
Using the fan
When the fan is on, it helps distribute air throughout your home for a
more even temperature in all spaces. You can set the thermostat so
that the fan runs only during your heating and cooling cycles (auto
mode) or to run continuously.
The thermostat is set at the factory to run automatically as needed.
Here’s how to change the setting so it runs continuously.
1. Press the
fan button on the left. The display message
will change from
auto fan to fan on.
2. To return the fan to auto mode, press the
fan button
again. You will see
fan auto on the display.
To Next Page
Loading...
Need help?
General
