9
Once your network has been detected, select it from the list. If the
network is encrypted, you will be asked to enter a password for that
network. This is the password you created when the wireless router was
first set up.
After you provide the password, your Comfort Series Wi--Fi Thermostat
will automatically connect to the Internet. A chain link on the screen
indicates you have established a connection with the Carrier web servers.
Write down the registration code as you will need it when
configuring your Web Portal account. You can leave the code
displayed on the screen while you continue with the next step.
To set up Wi - Fi:
From the Home screen, press MENU.
Select Register Thermostat.
Select Continue.
Select Wi--Fi Settings.
Select Wi--Fi Radio " Enabled.
Select your network from the list.
If prompted, enter your network password.
The Comfort Series Wi--Fi Thermostat will automatically connect to
the Internet and display a registration code.
Write down the registration code; you will need it in the next step.
Having Trouble?
If you are having trouble connecting to the Internet or finding your
Wi--Fi network, you may need to configure your network parameters
manually. See Wi--Fi on Pg. 26.
To Next Page
Loading...
