38
COMMON TERMS AND WHERE TO FIND THEM
Auto changeover page 36....................................
This feature automatically switches your system from h eating to cooling - or from
cooling to heating - whenever necessary when in auto mode only (heat/cool).
Auxiliary heat (heat pump systems and Hybrid Heat systems only) .
page 25
Most heat pump systems can’t heat a home sufficiently when it gets very cold
outside so they use a supplemental heating source called auxiliary heat. The system
knows when to use this help and does so automatically. If it’s using auxiliary heat,
the display will show aux heat on when you press the mode button. You have no
control over the auxiliary heat function.
Backlighting page 31........................................
Backlighting illuminates your display. The backlight is on constantly at a dim level
that brightens when you push a button.
Dehumidify page 21........................................
When your heating and cooling system is used to dehumidify the air and the
thermostat is set up to dehumidify, the thermostat will instruct it to remove moisture
from the air as necessary when the air conditioning is on.
To Next Page
Loading...
Need help?
General
